Captured Foot Rope - 1 inch, 2 inch, 3 inch, & 4 inch rope designs

HMQT-CFR - Clear Acrylic - 1/4 inch thick

Now with Fabric Gripping Action® and EZ2C Lines®
Fabric Gripping Action® aids in keeping the tool in place while machine quilting around it. Our EZ2C Lines® are visible on a very wide range of colors and patterns.

Specifically designed to be used for Template/Ruler work, this tool creates a continuous line rope design using a simple process of following the letters. Instructions are written on the tool. There are 4 sizes in this one tool - 1 inch rope, 2 inch rope, 3 inch rope, 4 inch rope. Digitally printed with registration lines AND instructions, then laser cut from 3/16 inch acrylic this template can be used on most Low High Shank Home machines with the appropriate foot. Make sure your foot will clear 3/16 inch acrylic or cannot hop on top of it. If either of these can occur, consider using a different thickness of acrylic (see our thicker 1/4 inch Captured Foot Rope tool or our thinner 1/8 inch Captured Foot Rope tool). NOTE: You must be able to raise and lower your foot to use this tool.

PDF Instructions

Video Instructions

Application Photos (click to enlarge)